Gas / GBB

2 piston heads set for Tokyo Marui G18C. These piston heads are suitables for TM G18C GBB and replace the original plastic part to guarantee a better seal over time.

Piston head for Tokyo Marui 5.1 / 4.3 / 1911. This piston head for Colt GBB TM replaces the original plastic part to guarantee a better seal over time. The FKM O'ring supports high speeds.

Piston head for WE M&P. This piston head for WE SW M&P replaces the original plastic part to guarantee a better seal over time.

Set of 5 FKM GBB piston head O-rings. FKM O rings ideal for high speed configuration.

GBB piston head O rings. O'rings with diameter of 9 and 9.2 mm.

Aluminum Blowback housing Silver for KSC G17 G34. Super light blowback housing in CNC Aluminum. Improves the performance of the GBB by increasing the speed of the slide.

Aluminum Blowback housing Black for TM G17 (except gen4). Super light blowback housing in CNC Aluminum. Improves the performance of the GBB by increasing the speed of the slide.

Metal sear for TM Hi Capa 5.1 / 4.3. Sear made of durable CNC steel. As a replacement for the original sear of a Marui Hi Capa gbb.

Sear spring for TM Hi Capa. Sear spring light one made of stainless steel. As a replacement for the original sear of a Marui Hi Capa gbb to make every trigger pull faster & lighter, especially design for IPSC player.

Spring set for TM P226. Set of springs to replace the original springs to give a new lease of life to a Marui P226 GBB.- 3 loading nozzle springs- 4 hammer springs (2 x 2 types)

Spring set for TM G17. Set of springs to replace the original springs to give a new lease of life to a Marui Glock GBB.- 2 valve knocker disconnect springs- 4 hammer springs (2 x 2 types)

Spring set for TM Hi Capa. Set of springs to replace the original springs to give a new lease of life to a Marui Hi Capa 5.1 / 4.3 GBB.- 2 valve knocker disconnect springs- 2 firing pin springs- 2 mag catch springs- 2 plunger springs

Enhanced springs set for TM Hi Capa and 1911. Set of 3 springs 120% power up than original spring for Marui Hi Capa and 1911 GBB nozzle.

Enhanced springs set for TM Hi Capa and 1911. Set of 3 enhanced springs to remplace original spring for Marui Hi Capa and 1911 GBB nozzle.

Enhanced springs set for TM Hi Capa and 1911. Set of 3 springs 140% power up than original spring for Marui Hi Capa and 1911 GBB nozzle.

Enhanced springs set for TM Glock 17. Set of 3 springs 120% power up than original spring for Marui G17 G26 GBB nozzle.

Spring set for TM M1911 Colt 45 series. Set of springs to replace the original springs to give a new lease of life to a Marui 1911 MEU Night Warrior Desert Warrior GBB.- 2 valve knocker disconnect springs- 2 firing pin springs- 2 plunger springs

Hammer protection pad for TM Hi Capa M1911 Colt 45 slide. This CNC aluminum 7075 slide protection of hammer return fits Marui Hi Capa and 1911 series. This part can speed up the hammer movement while decreasing the blowback power.

Magazine lip for TM Glock. This mag lip for Glock Marui GBB increase durability and stability of the magazine.

Magazine lip for TM Hi Capa series. This mag lip for Hi Capa Marui GBB increase durability and stability of the magazine.

Reinforced nozzle for TM Glock 17 26. This reinforced nozzle is suitable for replacing a used nozzle from Glock 17 and 26 Tokyo Marui or a configuration to use a more powerful gas than that supported by the original Marui nozzle.

Reinforced nozzle for TM Hi Capa 5.1 4.3. This reinforced nozzle is suitable for replacing a used nozzle from Hi Capa Tokyo Marui or a configuration to use a more powerful gas than that supported by the original Marui nozzle.

Reinforced nozzle for TM 1911 and assimilated. This reinforced nozzle is suitable for replacing a used nozzle from 1911 MEU Desert Night Warrior 45 Tokyo Marui or a configuration to use a more powerful gas than that supported by the original Marui nozzle.

Reinforced nozzle for TM P226. This reinforced nozzle is suitable for replacing a used nozzle from P226 Tokyo Marui or a configuration to use a more powerful gas than that supported by the original Marui nozzle.

BUBO SCANDIACUS piston head for Tokyo Marui 5.1 / 4.3 / 1911A1 / P226 / G26 / G26 Advance. High quality, lightweight and resistant DYNA piston head for TM GBB replaces the original plastic part. It is produced by the BUBO SCANDIACUS brand, a subsidiary of Deep Fire for handgun products.

Replacement springs set for TM Hi Capa. Set of springs to replace the original springs to give a new lease of life to a Marui Hi Capa 5.1 / 4.3 GBB.

Set of 5 Inlet valves O rings for TM magazines. These Marui magazines O-rings inlet valves are more resistant than original parts. They will allow the Tokyo Marui gas chargers to be sealed again.

Recoil buffers for Hi Capa and 1911. This kit of recoil buffers includes 3 spring support shims and 3 buffers of 2 types gray (soft) and black (hard) to be installed according to the wanted kick.

Recoil buffers for Glock Tokyo Marui. These recoil buffers are intended to cushion the impact of the slide on the frame and to adjust the slide speed from smooth and steady to fast depending on the use of the shims and buffers provided.

Enhanced hard recoil spring and shim for Tokyo Marui Hi Capa. This enhanced hard spring speeds up the reset of the slide bolt which increases the rate of fire.

Enhanced soft recoil spring and shim for Tokyo Marui Hi Capa. This enhanced spring speeds up the reset of the slide bolt which increases the rate of fire.

Lightweight recoil spring rod for Tokyo Marui Hi Capa. Lightweight rod in aluminium.

AIP - Enhanced 120% Recoil / Hammer Springs for Tokyo Marui Hi Capa. Faster and harder slide reset FPS increase

AIP - Enhanced 140% Recoil / Hammer Springs for Tokyo Marui Hi Capa. Faster and harder slide reset FPS increase

AIP - Enhanced 100% Recoil / Hammer Springs for Tokyo Marui Hi Capa. For original part replacement.

AIP - Enhanced Recoil Spring for Tokyo Marui Hi Capa. ROF increasing Short stroke recoil spring Slide lock will be disable

Stainless spring plug for Glock Tokyo Marui. Recoil spring included.

O-rings for custom recoil rod. Allows the two parts of the recoil rod to be maintained despite vibrations.